Recently I presented myself and my internet friends with a challenge. I challenged us to sew a garment that we would be proud to wear in public. I wanted this to be a challenge for all sewing levels so I made the stipulation that the participants needed to "try something new".
Well, I met the challenge when I created my
circle top. But I didn't really push myself to try something new or learn a new skill. Sewing a garment from virtually no pattern and working with a strong print were new things, but not super challenging. So, I made another garment! I made a maxi dress, or you might call it a long sun dress. What do you think?
The 3 new things I tried with this dress were:
1. Making a dress with no pattern at all!
2. Shirring!
3. Using "Fray Check"!
I started with a couple yards of a gauzy, crinkly, cotton floral that faded from turquoise to brown. I don't have a dress form, so I just wrapped the fabric around myself to find an acceptable width. I wrapped it loosely enough so I knew I had plenty of ease on my hips and around my ankles for walking. I gave myself an extra 4 inches of overlap--just to be on the safe side--and cut into my fabric.
I folded over the top edge twice and hemmed it. Then I began shirring. I shirred about 5 rows along the top edge. I wrapped the dress around me (the dress form!) and tested the fit. Surprisingly, it stretched all the way around me and didn't look too bad. While I had the "dress" wrapped around me, I pinned a safety pin right under my bra line. (One thing I hate about buying maxi dresses off the rack is that my chest is always too big for them.) Then I made around 5 more rows or shirring under that mark. Here's a nifty diagram I made to illustrate my point:
After all the hemming and shirring, my dress was looking a little short. I decided to add a 4 inch border along the bottom hem. I started with a 9 inch wide strip of brown cotton that was ling enough to go all the way around the bottom of the dress. I ironed and sewed it to the dress sort of like this:
The brown band added some weight to the bottom of the dress, both visually and functionally. I liked it! Using my own body as a dress form and a quilter's supply of safety pins, I pinned the dress closed and sewed up the side. I left the bottom of this seam open about 14 inches. I folded the edge over twice and stitched up the raw edges, creating a slit. Now, I can cross my legs or climb up the bleachers at the ballpark without needing to hike my dress very much. The sides of the slit are a little wonky and wavy, but I'm not sweating it. For future reference, I'll have to remember to reinforce those edges so they'll lay nice and flat.
At this point I knew I needed straps. Hello, this girl needs to wear a bra and those strapless ones are no good for me. But I put this idea aside because I had a fit problem. With the shirring placed where it was, the front looked great. However, the back area between the shirring was loose and baggy having nothing to fill it. So I tightened it up with several more rows of shirring just in the back. Awwww, shirring is good!!!
So with that problem fixed, I moved on to the straps. I made the straps pretty much like I made the brown band, only smaller. I gathered a 1.5 inch strip of fabric and stitched it into the straps. If you'll forgive the inaccuracy of my diagram, the straps and ruffles are made from the same floral fabric, you'll see what I mean here:
I constructed the straps, donned the dress once more, safety pinned the straps to the dress, and then stitched them together. Easy, right? No I forgot to mention the easiest part: I didn't finish the edges of my ruffles on the straps. Instead, I used a product called
Fray Check. I just dabbed a small amount of the liquid on the raw edges, allowed it to dry, and no more fraying! The edges are stiff, almost as if I used a clear nail polish on them, but the finish is matte and fabric is still flexible. I've washed it once, and it's still intact. Neat stuff!
The last step was to make a sash out of the brown to tie around the empire waistline of the dress. It was an addition suggested by my 5 year old daughter. A good call, I'd say. I tried tying it in the front as well, but prefer it tied in the back sans the bow.
So there you have it! If I can do it, so can you!
Here are the shirring tutorials I used:
http://www.rufflesandstuff.com/2010/02/shirring-tutorial.html
http://www.makeit-loveit.com/2011/11/sewing-tip-shirringsmocking-with-elastic-thread.html
I have a Singer HD4423 with a drop in bobbin. I wound the elastic thread by hand. I set my tension to 3. I had no problem whatsoever. Easy-peasy, I swear!
Happy crafting and big hugs from Montana,
.jpg)
